The charger enables charging gel and standard acid batteries.
The charger is designed for charging open-cased batteries as well as a wide range of sealed lead-acid batteries used in passenger cars, motorcycles and some other vehicles, e.g. WET batteries (with liquid electrolyte), GEL batteries (with electrolyte in the form of gel) or batteries with electrolyte trapped in glass fiber mats (AGM).
The battery capacity is from
6 V / 1.2 Ah to 6 V / 14 Ah
from 12 V / 1.2 Ah to 12 V / 140 Ah.
The special design allows recharging practically up to 100% of the battery capacity.
In addition, it is possible to connect the battery to the charger permanently so as to keep the battery in optimal condition during the period when it is not in use and not to damage it during this time.
The charger has a total of 6 charging modes for different batteries in different states.
This makes charging more efficient and reliable.
Rectifier operation is controlled by the MCU internal microprocessor.
After selecting the required charging mode, the charger recognizes the connected battery (voltage, charging state) and calculates the necessary charging parameters (charging voltage, charging current).
This allows a safe and efficient charging process to be established.
If you select a charging mode that is inappropriate for the battery or if the battery is damaged, the charging process will not be initiated.
The charger will show an error code on the indicator.
Voltage: 230V, 50Hz
Output voltage: 6V / 12V
Charging current: 1A, 6A
Battery type: 160Ah
Length of the charging cables: 150cm
Power cord length: 150cm