LATHE WITH LCD DRILL MILLING MACHINE
Drilling, deep milling, face milling, turning.
ADVANTAGES OF A LATHE WITH A DRILLING MACHINE AND A MILLING MACHINE:
The lathe bed is made of high-quality cast iron: high yokes and transverse ribs dampen vibrations and ensure high rigidity of the structure. The structure has a headstock integrated with the drive unit, mounted longitudinal slides and lead screws. Two precision, heat-hardened angular side guides ensure perfect guidance for the longitudinal slide and tailstock.
High-grade cast iron headstock with high vibration damping index: it is attached to the lathe bed with four bolts. The headstock houses the main spindle with two precision tapered roller bearings and a drive unit. During turning, the spindle transmits torque to the workpiece and the chuck.
Longitudinal carriage with precision-ground guides: the guides do not show any play. The lower guiding elements can be freely adjusted. The transverse slides are mounted on a longitudinal sled and are connected by a dovetail. The lateral play is adjusted by means of the wedges. The cross slide is moved by a conveniently positioned handwheel. There is a ring on the circle with a scale.
The tool post enables the simultaneous installation of four tools: to set any of them to the working position, loosen and turn the lever of the central clamp.
The tailstock runs on angle guides and can be locked anywhere: it has a heavy-duty No. 2 Morsea taper spindle and a scale notched on the spindle surface. The spindle can be locked in any position with the locking lever. The spindle can be pulled out from the tailstock with a hand wheel located at its rear part.
Universal three-jaw lathe chuck: enables the assembly of bars with round, triangular, square, rectangular, hexagonal and bi-stable profiles.
Four-socket chuck: equipped with four independently adjustable jaws, it allows for precise setting of asymmetrical details and very precise adjustment of cylindrical details.
Drill chuck: allows you to mount the drills to the center holes and to mount the drills on the tailstock
• Voltage: 230V / 50Hz
• Power: 550W / 650W
• Rotation: 0-2500rpm
• Noise level: Lwa 75.70dB, Lpa 70.00dB
• Distance between centers: 400mm
• Maximum table feed: 130mm
• Maximum cross feed: 300mm
• Maximum spindle feed: 220mm
• Spindle rotation range: -45; +45
• Maximum power: 550W
• Spindle speed: L (0-1100Rpm) H (0-2500rpm)
• Drilling: 13mm
• Face milling: 16mm
• Face milling: 30mm
• Cone in the spindle: MT3
-Height: approx. 80 cm
-Width: approx. 52 cm
-Length: approx. 88cm
Before ordering this product, please contact us to arrange delivery at email@example.com