PNEUMATIC GUN FOR PLASTERING, PAINTING WITH A BALL VALVE

In stock
€18.99
PNEUMATIC GUN FOR PLASTERING, PAINTING WITH A BALL VALVEProfessional pneumatic gun for painting, plastering, plastering and sandblasting. It is a newer version of the gun equipped with a ball valve (at the quick-coupler), which allows for complete air shut-off during the painting or plastering process.The gun is designed for painting...
€18.99
PNEUMATIC GUN FOR PLASTERING, PAINTING WITH A BALL VALVE

Professional pneumatic gun for painting, plastering, plastering and sandblasting. It is a newer version of the gun equipped with a ball valve (at the quick-coupler), which allows for complete air shut-off during the painting or plastering process.

The gun is designed for painting with emulsion paint, glue paints, for whitewashing with lime as well as for applying acrylic plasters on thermal insulation, it is ideal for applying plaster, gypsum finish coats, it can be used to make textures, i.e. "lamb" on the wall.

AIR FLOW ADJUSTMENT THROUGH A BALL VALVE!

Thanks to the mounted ball valve, the gun can work with small compressors (air can be disconnected).

The pressure needed to operate the gun should be about 2-4 atmospheres, so even a compressor with a 50 or 24L tank is sufficient.

The gun container is half-covered, which enables painting ceilings without using any additional elbows, covers, etc. solutions.

The gun is made entirely of aluminum, so it is light and comfortable to use, easy to clean and durable.

TECHNICAL DATA:
1/4 "air connection
Working pressure 4-8 / 60 - 115 bar / psi
Air consumption 227-396 L / min
5.5 L tank capacity
Replaceable stainless steel nozzles 4, 6, 8 mm
Smooth regulation of air flow
Air shut-off ball valve
Method of administration: gravity

SET COMPOSITION:
- Plaster gun
- 5.5l plastic tank
- 3 nozzles 4, 6, 8 mm
- Two seals
- Metal clamp
- Original packaging
- Instruction
You have successfully subscribed!