The Silver brand paint set is intended for painting surfaces with water-based varnishes, priming acrylics, spray putties, metallized and pearl varnishes, etc.
The gun is made in HVLP technology - adapted to lower pressure, which allows for savings of up to 30% of paint. A suitable pneumatic system with compressed air with regulated pressure up to 0.3 MPa is necessary to work with the gun.
The principle of operation of the device is based on compressed air sucking in an appropriate amount of varnish emulsion from the paint container and the formation of varnish mist (particles of paint and gas) at the outlet of the gun nozzle.
The gun is equipped with three adjustments:
air pressure (setting the amount of material in relation to air)
amount of paint (amount of material thrown)
spray pattern (paint spray type)
The included reducer allows you to adjust the pressure supplied from the compressor to the spray gun, which significantly facilitates work with the device.
Nozzle diameter 1.4 mm (brass needle)
Nozzle diameter 1.7 mm (brass needle)
Regulation of the amount and stream of varnish
Air pressure adjustment
Aluminum body, reservoir with a capacity of 600 ml
Recommended working pressure from 15 to 45 PSI
Air flow 269-419 l / min
1/4 inch thread
Connection thread: 1/4 "and quick coupling
Nominal pressure: 0-8bar
Maximum pressure: 10.3 bar
- 1.4 mm HVLP spray gun
- Additional 1.7mm nozzle
- 600ml paint tank
- Pressure reducer with timer